BASCODUR 3312-95

Solvent-based 2C high-gloss coating for interior use

  • 2-component
  • Solvent-borne
  • Clear coat

BASCODUR 3312 is a solvent-based 2C high-gloss coating for top-class interiors. The product has a deep-acting effect and is characterised by an appealing surface with a good mechanical strength. The coating is resistant to household chemicals and mechanical stress.

Technical data sheet

Surface preparation

Every substrate must be well-cleaned, dry and free from grease and oil.


Stir or shake the product well for several minutes before use, if necessary by machine.

Application conditions

Recommended temperature for surroundings and product: +15°C-25°C. Do not apply below +10°C.


Storage temperature is +5°C - +30°C. Store in a tightly closed container.

The room temperature should be between 18 and 25°C. Ideal relative humidity 50-60%. Always filter the high-gloss coating through a 50 µm sieve before filling the spray gun. We recommend using a spray gun with a nozzle size of up to 1.4 mm. A uniform surface can be achieved by applying in cross layers. The gloss level of the surface is affected by the techniques used: Layer thickness, spraying technique and drying conditions. We recommend carrying out a spray test with the product before starting work. Important information: The recommendations in the data sheets "7 days – 7 steps" (VTM 4275) and "10 tips for high-gloss coating" (VTM 4120) must always be observed. Important: OWEDUR 5037-99 is sensitive to humidity. Close the container immediately after use.
Weight solids abt. 45 % by weight
Volatile organic compound (VOC) abt. 533 g/l
Pot life 1.5 h (+23 °C)
Theoretical spreading rate 120 g/m²; 8.3 m²/kg
Density abt. 0.97 g/ml
Mixing ratio by weight 2:1
Drying time – dust free after 90 minutes
Drying time – through-dry after 10-14 days
Drying time - overcoatable after 1-2 hours
Clean up Wash the equipment immediately after use.
Colours Colourless.
Safety markings See safety data sheet.
Gloss value 90