AQUATOP 2760-03
Topcoat
- Topcoat
- Topcoat
AQUATOP 2760-03 is a water-borne, industrial topcoat for wood.
Use: HDF doors and wooden parts of wood-aluminium windows and skylights. Before using the product, the manufacturer should be contacted to check the suitability of the product for the object in question.
Technical data sheet
Safety data sheet
Other product specific documents
Surface preparation
The surface must be clean and dry. The moisture content of the wood should be approx. 13% and should not exceed 15%.
Pretreatment is required for wood substrates not meeting Durability Class 3, EN 350:2016. Teknos has a range of preservative products meeting the requirements of EN 599-1, please contact Teknos for further guidance.
Is applied on primed parts or possibly intermediate treated parts.
Application
Stir thoroughly before use.
Wet film range 200-250 µm.
Application conditions
The best result is achieved when the temperature of the air is +23°C - +38°C, the relative humidity of the air 50 - 70% and the ventilation is good.
Storage
Must not freeze. Storage temperature is +5°C - +30°C. The storage stability is shown on the label. Must be stored tightly closed and kept cool.
| Volatile organic compound (VOC) | abt. 36 g/l |
|---|---|
| Gloss | Semi-matt |
| Tinting system | Teknocolor |
| Theoretical spreading rate | 5.5 - 6.5 m²/l (dry film 60 µm) |
| Thinner | The product is delivered ready for use. |
| Clean up | Water. |
| Colours | Base 1, 2 and 3 (white and opaque colours). |
| Safety markings | See safety data sheet. |
| Gloss value | 30-35 |