AQUATOP 2600-26

Topcoat for spray application

  • Topcoat

AQUATOP 2600-26, a water borne industrial topcoat for wood designated for exterior use such as windows and doors

AQUATOP 2600-26 can be applied by all conventional spraying systems - both hand spraying and automated and robot spraying system such as: Airless, Airmix, Disc and High Rotation Bells. AQUATOP 2600-26 will typically be applied on pre-treated substrates such as softwood, hardwood, Accoya, modified wood, HDF and MDF. Exterior durability of coating systems including AQUATOP 2600 is typically documented according to EN 927-2.

Surface preparation

The wood must be free from wood dust and contamination. The moisture content of the wood should be approx. 13% and should not exceed 15%. Pretreatment is required for wood substrates not meeting Durability Class 3, EN 350:2016. Teknos has a range of preservative products meeting the requirements of EN 599-1, please contact Teknos for further guidance.

Application conditions

Stir thoroughly before use. Optimum temperature for products and surroundings: +18°C - +22°C. Optimum relative air humidity: Approx. 50%. Wet film range 150-300 µm.

Storage

Storage temperature is +5°C - +30°C. Shelf life in unopened containers: See “Best before date” on the label. Keep containers tightly closed after use.
Volatile organic compound (VOC) See safety data sheet.
Gloss Gloss
Tinting system Teknocolor;Teknoshade
Theoretical spreading rate 3-7 m²/l
Clean up Water.
Colours Base 1, 2, 3 and base T (white, opaque and translucent colours).
Packages Available in a range of standard pack sizes.
Safety markings See safety data sheet.