AQUATOP 2012-22
Topcoat
- Topcoat
AQUATOP 2012-22 is a fast drying water-borne topcoat that is based on acrylic.
Use: Wood-aluminium window frame parts that are protected from weathering-stress. AQUATOP 2012-22 has excellent sanding properties. Before using the product, the manufacturer should be contacted to check the suitability of the product for the object in question.
Surface preparation
The surface must be clean and dry. The moisture content of the wood is to be below 20%.
Pretreatment is required for wood substrates not meeting Durability Class 3, EN 350:2016.
Teknos has a range of preservative products meeting the requirements of EN 599-1, please contact Teknos for further guidance.
TEKNOPOX-KITTI 100 Epoxy Putty is recommended as priming putty, and a suitable fine filler for intermediate puttying after the priming.
Application
Stir thoroughly before use.
Application conditions
During the application and drying period the temperature of the ambient air, the surface and the product shall be above +15°C and the relative air humidity below 80%. The best result is achieved when the temperature of the air is +23°C - +38°C, the relative humidity of the air 50 - 70% and the ventilation is good.
Storage
Must not freeze. The best storage temperature is +10°C - +25°C.
| Total mass of solids | abt. 600 g/l |
|---|---|
| Volatile organic compound (VOC) | abt. 36 g/l |
| Gloss | Semi-matt |
| Theoretical spreading rate | 6.6 m²/l (wet film 150 µm, dry film 60 µm) |
| Drying time – dust free | approx. 30 min |
| Drying time – touch dry | approx. 40 min |
| Drying time - overcoatable | 1 - 2 h |
| Thinner | Water. |
| Clean up | Water. |
| Colours | White. |
| Safety markings | See safety data sheet. |
| Approvals & certificates | M1 classification |
| Gloss value | 20-30 |