AQUA PRIMER 2907-02

Wood preservative for flow coating / dipping

  • Water-borne
  • Wood preservative

AQUA PRIMER 2907-02 is an aqueous industrial wood preservative for new untreated wood designated for exterior use (use classes 2-3) as defined in BS/EN 335-1 such as windows and doors

The product protects the wood surface and the treated area against wood destroying and wood discolouring fungi and satisfies the performance requirements of EN 599-1. Furthermore the wood becomes more dimensional stable. AQUA PRIMER 2907-02 can be applied by flow coat, vacumat, dipping (manual or automated), brush machine and brush. AQUA PRIMER 2907-02 will typically be used for non-durable soft- and hardwood. Wood treated with AQUA PRIMER 2907-02 must be coated with a topcoat prior being used for exterior elements. AQUA PRIMER 2907-02 is BPR authorized in several EU countries, so prior to start using AQUA PRIMER 2907-02, please contact your local Teknos office or e-mail to sales@teknos.com. Use biocides safely. Always read the label and product information before use.

The product protects the wood surface and the treated area against wood destroying and wood discolouring fungi and satisfies the performance requirements of EN 599-1. Furthermore, the wood becomes more dimensional stable. Authorisation no. UK-2016-0964.

Surface preparation

The wood must be free from wood dust and contamination. Windows and doors: approx. 13% and should not exceed 15% Cladding: 18 ± 2%

Application conditions

The product is delivered ready for use. Stir thoroughly before use. Due to evaporation, the solid content of the liquid must be adjusted with water regularly. This adjustment is based on the measured solid of the liquid in the system. Optimum temperature for products and surroundings: +18°C - +22°C. Optimum relative air humidity: Approx. 50%.

Storage

Storage temperature is +5°C - +30°C. Shelf life in unopened containers: See “Best before date” on the label. Keep containers tightly closed after use.
Weight solids abt. 10 % by weight
Volatile organic compound (VOC) abt. 28 g/l
Tinting system Teknocolor,Teknoshade
Drying time – forced drying The drying time can be reduced using special drying systems to force drying. The drying times are approximate and may vary according to wood quality, temperatures, humidity and ventilation.
Drying time - overcoatable 2-3 hours
Clean up Water.
Colours Translucent
Packages Available in a range of standard pack sizes.
Safety markings See safety data sheet. To protect aquatic organisms, do not use the treated wood near the aquatic environment (rivers, streams, lakes etc.). The surface of the wood must be coated with e.g., varnish or paint. Coating of the surface must be carried out at regular intervals.