Solvent-based 2C-EP primer with active corrosion protection

Surface preparation

Every substrate must be well-cleaned, dry and free from grease and oil. Coating removal: Strip, sandblast Completely remove loose existing coatings, sand adhering existing coatings well.


Stir or shake the product well for several minutes before use, if necessary by machine.

Application conditions

Recommended temperature for surroundings and product: +15°C-25°C. Do not apply below +10°C.


Storage temperature is +5°C - +30°C. Store in a tightly closed container.

For hot-dip galvanised substrates, allow the primer to dry for at least 12 hours before overcoating.
Weight solids abt. 71 % by weight
Pot life 8 h (+23 °C)
Hardener Comp. B: ALPOTECT 5103-99
Theoretical spreading rate 100-120 g/m²; 9.0 m²/kg
Density abt. 1.433 g/ml
Mixing ratio by weight 5:1
Drying time – dust free after 30 (20) minutes
Drying time – touch dry after 180 (60) minutes
Drying time – through-dry after 12 (8) hours
Drying time - overcoatable after 45 (30) minutes
Thinner ALPOTECT 3000-98
Clean up Wash the equipment immediately after use. UNIVERSALREINIGER U 8600-98 or ALPOTECT 3000-98.
Colours Certain colours are delivered from stock.
Safety markings See safety data sheet.