Solvent-based 2C enamel coating for interior use

  • 2-component
  • Solvent-borne
  • Topcoat

ALPOCRYL RF 5364 is a particularly fast-drying, solvent-based, 2C enamel coating with excellent adhesion and high covering power. The coating is resistant to household chemicals and mechanical stress. The coating is ring-resistant and has a high resistance to metal abrasion, also without recoating. ALPOCRYL RF 5364 can also be used for ship interiors. The product can also be processed on spraying lines with forced drying.

When used as a flame retardant coating for seagoing ships according to SOLAS (International Convention for the Safety of Life at Sea) 74/88 Reg. II-2/3, II-2/5 and II-2/6, latest version, IMO Resolution MSC.36(63)-(1994 HSC Code)7, IMO Resolution MSC.97(73)-(2000 HSC Code)7, this product can only be combined with other approved and technically suitable products. A risk assessment has been carried out according to Directive 2014/90/EU, Annex II, Section 3. The cured and dried coating poses neither a physical nor a health hazard, nor a hazard to the environment. When used in ship interiors, the maximum total product application quantity of 150 g/m2 should never be exceeded.

Surface preparation

Every substrate must be well-cleaned, dry and free from grease and oil. Coating removal: Sand, strip


Stir or shake the product well for several minutes before use, if necessary by machine.

Application conditions

Recommended temperature for surroundings and product: +15°C-25°C. Do not apply below +10°C.


Storage temperature is +5°C - +30°C.

On MDF boards with a density of below 700 kg/m3 the surface must be pre-isolated with ALPOLAN UNIVERSALGRUND 2420-00. Strengthen the edges or milled grooves with ALPOLAN UNIVERSALGRUND 2420-00. Moisture-resistant wood based materials must be used for rooms with a high moisture exposure (e.g. kitchens, bathrooms etc.). This product should not be used on horizontal surfaces in these areas.
Weight solids abt. 45 % by weight
Volatile organic compound (VOC) abt. 610 g/l
Pot life 8 h (+23 °C)
Mixing ratio 10:1 by volume (comp. A : comp. B)
Hardener Comp. B: UNIPUR 279 1910-99
Tinting system Largo
Theoretical spreading rate 120 g/m²; 8.3 m²/kg
Density abt. 1.11 g/ml
Drying time – dust free after 20 minutes
Drying time – touch dry after 60 minutes
Drying time – through-dry after 10-14 days
Drying time - overcoatable after 2 hours
Thinner VERDÜNNER 1300-98, VERDÜNNER 0950-98.
Clean up Wash the equipment immediately after use. VERDÜNNER 1000-98 or UNIVERSALREINIGER U 8600-98.
Colours Available in all RAL and NCS-S colours or at your request.
Safety markings See safety data sheet.
Approvals & certificates IMO FTPC Part 5,Marine Equipment Approval (Module B)
Gloss value 15