ALPOCRYL PERLSTRUKTUR 5371-30
Solvent-based, textured 2C top coat for interior use
- 2-component
- Solvent-borne
- Topcoat
ALPOCRYL PERLSTRUKTUR 5371 is a solvent-based, textured 2C top coat with high covering power. The product is resistant to mechanical stress. The coating is characterised by its very coarse texture.
Technical data sheet
Surface preparation
Every substrate must be well-cleaned, dry and free from grease and oil. Coating removal: Sand, sandblast
Application
Stir or shake the product well for several minutes before use, if necessary by machine.
Application conditions
Recommended temperature for surroundings and product: +15°C-25°C. Do not apply below +10°C.
Storage
Storage temperature is +5°C - +30°C. Store in a tightly closed container.
Effect paints should only be applied using air atomisation, e.g. with a gravity feed gun or a low-pressure double membrane pump.
Please take note of the technical data sheet "Large-area coatings with effect paints" (VTM 4126).
| Weight solids | abt. 44 % by weight |
|---|---|
| Volatile organic compound (VOC) | abt. 568 g/l |
| Pot life | 8 h (+23 °C) |
| Mixing ratio | 10:1 by volume (comp. A : comp. B) |
| Hardener | Comp. B: UNIPUR 279 1910-99 |
| Tinting system | Largo |
| Theoretical spreading rate | 96 g/m²; 10.4 m²/kg |
| Density | abt. 1.18 g/ml |
| Drying time – dust free | after 10 minutes |
| Drying time – touch dry | after 30 minutes |
| Drying time – through-dry | after 10-14 days |
| Drying time - overcoatable | after 60 minutes |
| Thinner | VERDÜNNER 0950-98, VERDÜNNER 1300-98. |
| Clean up | Wash the equipment immediately after use. |
| Colours | Available in all RAL and NCS-S colours or at your request. |
| Safety markings | See safety data sheet. |
| Gloss value | 30 |