Coatings for wind turbine foundations
Protective coating systems that offer excellent resistance against corrosion and mechanical forces for offshore wind foundations, designed to prolong the expected lifetime and to lower operational and maintenance costs.
- Internal and external coating systems for offshore wind turbine structures according to ISO 12944-9 CX offshore environments and NORSOK M-501
- Polyurea systems to protect from mechanical impacts
- Coating solutions for foundation repair
- Teknos offers full project support from early stage design through to final application: our technical service professionals have vast experience in the wind energy sector
Extremely durable polyurea to protect foundations against impacts
The surface of an offshore foundation has to withstand extreme mechanical wear and impact. For its technical superiority, Polyurea is an ideal solution to protect the transition piece and boat landings from crew transfers and other mechanical impact:
- Extremely durable and elastic coating - able to stretch nearly 400% of its own size without cracking
- Protection against mechanical impacts - minimizing damages to the anticorrosive paint system on the foundation
- Polyurea can be tinted to match the standard colour requirements
COATING SYSTEMS FOR FOUNDATIONS' INTERNAL AND EXTERNAL SURFACES
Coatings for buried, submerged, splash and atmospheric zones of internal and external foundation structures according to EN ISO 12944-5 corrosivity categories.
Paint systems for steel structure of wind turbine foundations, external surfaces:
Splash zone, application areas 
NORSOK M-501, system no. 7A
| Product | Type | DFT (µm) |
Volume solids (%) |
Theoretical spreading (m2/l) | VOC (g/l) |
VOC (g/m2) |
Drying |
Paint volume (l/100 m2) |
| TEKNOMASTIC 80 PRIMER | EP | 200 | 82 | 4,1 | 200 | 49 | 4 | 24,4 |
| TEKNOMASTIC 80 PRIMER | EP | 200 | 82 | 4,1 | 200 | 49 | 4 | 24,4 |
| TEKNOMASTIC 80 PRIMER | EP | 200 | 82 | 4,1 | 200 | 49 | 6 | 24,4 |
| Total | 600 | 147 | 14 | 73 |
Submerged, application areas 
NORSOK M-501, system no. 7B
| Product | Type | DFT (µm) |
Volume solids (%) |
Theoretical spreading (m2/l) | VOC (g/l) |
VOC (g/m2) |
Drying time (h) |
Paint volume (l/100 m2) |
| TEKNOMASTIC 80 PRIMER | EP | 175 | 82 | 4,7 | 200 | 43 | 4 | 21,3 |
| TEKNOMASTIC 80 PRIMER | EP | 175 | 82 | 4,7 | 200 | 43 | 4 | 21,3 |
| Total | 350 | 86 | 8 | 43 |
Novel boat landing system, application areas
| Product | Type | DFT (µm) |
Volume solids (%) |
Theoretical spreading (m2/l) | VOC (g/l) |
VOC (g/m2) |
Drying time (h) |
Paint volume (l/100 m2) |
| TEKNOMASTIC 80 PRIMER | EP | 200 | 82 | 4,1 | 200 | 49 | 4 | 24,4 |
| TEKNOMASTIC 80 PRIMER | EP | 200 | 82 | 4,1 | 200 | 49 | 4 | 24,4 |
| TEKNOMASTIC 80 PRIMER | EP | 200 | 82 | 4,1 | 200 | 49 | 6 | 24,4 |
| TEKNOPUR 300-800 | PUA | 5000 | 100 | 0,2 | 0 | 0 | 1 | 500 |
| Total | 5600 | 147 | 15* | 573 |
*Heavy and sharp impacts should be avoided during the first few days after coating. 1 hour curing time for TEKNOPUR 300-800 is recommended before moving the coated object. General TEKNOPUR 300-800 curing properties are: tack-free in 12 sec, suitable for light traffic in 40 sec, fully cured in 24 hours, immersion tolerant in 1-3 days.
Flagship project
World’s largest offshore wind farm, Hornsea 2’s turbine foundations are protected with elastomeric polyurea coating.
Check reference
ASK A QUESTION
Fill in the form below and our representative will contact you as soon as possible
* Indicates required field
By submitting your contact information you agree the Teknos Privacy Statement. Your personal data is only for Teknos use and will not be shared with third parties.