TEKNOCOAT AQUA 1878-81

One-component topcoat

Water-borne enamel for surface treatment of wood, MDF, Masonite, and chipboards for interior use.

Impact-resistant and tough surface with good non-blocking properties. Good adhesion to primer and substrate. Good surface appearance. Fast drying. Good resistance to water, coffee, and alcohol.

Surface preparation

The wood must be free from wood dust and contamination.

Application conditions

Certain timbers such as cedar, oak, mahogany, ash, etc. contain water-borne extractives, which can leach through the coating and stain opaque finishes. Please contact our technical department for further information.

Storage

The storage stability is shown on the label. Store in a tightly closed container. Optimum temperature: +18°C - +22°C. Must not freeze.
Volatile organic compound (VOC) abt. 33 g/l
Theoretical spreading rate 8-10 m²/l
Drying time – touch dry 30 min.
Drying time – forced drying +50°C / 50% RH: - touch dry: 10-15 min. - fit for sanding: 15-20 min.
Thinner Water.
Clean up Water, TEKNOCLEAN 1949-00.
Colours White and white pigmented colours. Base T (translucent colours).
Safety markings See safety data sheet.