HELO YACHT
Yacht varnish
- UV resistant
- Wear resistant
- Solvent-borne
- Varnish
HELO YACHT yacht varnish is a fast drying urethane/alkyd based varnish with good resistance properties. Finish: full gloss.
Examples of uses are yachts, furniture and other woodwork whenever a durable varnish coat is desired.
HELO YACHT provides excellent resistance to action by weather and water. The varnish film has good gloss retention and does not crack or disintegrate. The varnish contains UV absorber, and therefore the resultant coat yellows very little. The varnish does not yellow even in sea water. It protects the woodwork against greying and cracking. The varnish film is hard and at the same time elastic and thus withstands abrasion and impacts. Detergents, grease or oil do not damage it.
Technical data sheet
Surface preparation
Clean the surfaces from grease and dirt. Wash varnished surfaces with RENSA SUPER paint cleaner. Matt down old, intact varnish coats. If the old varnish coat is brittle or flaking, it is removed by scraper and paint remover. Cautious burning off can also be used. Thereafter the surface is sanded. Objects susceptible to moisture are before the varnishing primed with clear wood preservative from the WOODEX series. Sand the surface again before varnishing and remove the dust.
Application
Stir the varnish thoroughly before use down to the bottom of the can. Dilute the varnish for priming by about 20% with TEKNOSOLV 1621. Sand lightly and remove the dust before the top coating. Top coat with undiluted HELO YACHT yacht varnish. Apply two to four coats of the varnish. Sand lightly and remove the dust between all varnish coats. Apply the varnish with a broad varnish brush.
Application conditions
The surface to be varnished has to be dry. During the varnishing and drying period the temperature of the ambient air, the surface and the varnish shall be above +5 °C and the relative air humidity below 80 %.
Storage
Must be stored tightly closed and kept cool.
| Solids | abt. 44 % by volume |
|---|---|
| Volatile organic compound (VOC) | EU VOC limit value (kat A/i): 500 g/l. The product's VOC: max. 500 g/l. |
| Gloss | Full gloss |
| Density | abt. 9 g/ml |
| Practical spreading rate | 10 - 14 m²/l |
| Drying time – dust free | 1 h |
| Drying time – touch dry | 6 h |
| Thinner | TEKNOSOLV 1621 (solvent naphtha) |
| Clean up | TEKNOSOLV 1621 (solvent naphtha) |
| Colours | Clear |
| Packages | 1 L, 3 L |
| Safety markings | See Safety Data Sheet. NOTE! Because of the danger of self-ignition, any waste from the product, spray mist and soiled rags etc. are to be kept in a fire-proof place in air-tight containers. Immersion in water is also recommended. |
| Approvals & certificates | Finnish Key Flag |