Teknos has developed paints and coatings specially for wind turbine blades. Our turbine blade coating product family consists of a full range of products, from priming to finishing paints, and putties as well as repair solution for rotor blade leading edges.
Teknos’ advanced coating technologies enhance the longevity of wind turbine blades and enable short process times, higher productivity and considerable cost-out. These paint systems for wind turbine blades have been proven in different environment to perform in atmospheres ranging from challenging to harsh.
Our service includes the competent and committed support from our experienced application technicians.
Blade coatings Leading edge protection
Surface of wind turbine blades or other fiber glass components.
Humidity must be below 70% RH at ambient temperature (15– 30°C) or at elevated temperatures.
|Dry time (+23°C)||
|To handle||2 hours|
|To service||3 hours|
|Heating (+40°C)||To handle||No need|
|Dry Film Thickness area||70-150 µm|
|Density||EN ISO 2811-1||1.45 g/ml|
|Adhesion||Pull-off||≥ 8 Mpa|
TEKNOBLADE REPAIR 9000 is a solvent-free coating with 100% proportion of solids and no VOCs. It can be applied with a coat thickness of between 2000 μm - 3000 μm (2-3 mm) and it forms a protective elastic layer. The product can be used both for a preventive leading edge protection (LEP) on new rotor blades and for rotor blade repair. While a 3-coat system is required in conventional systems, TEKNOBLADE REPAIR 9000 is capable of repairing damaged edges with just one single coat. And the edge protection withstands exposure for even longer. A true revolution in rotor blade repair!
Business Development Manager