TEKNOFLOOR BOJA

Wooden surface to be treated is cleaned from dirt and dust. Sand the surface properly, last sanding with grit n:o 120. If needed the wooden surface can be wetted before applying the wood stain. Light swelling caused by wetting the surface is sanded before applying the wood stain. Fill the gaps with GAP parquet putty before last sanding. After finishing sanding and vacuum-cleaning apply the wood stain to the surface.

Stir well before use and if needed during the application. Ensure the shade of the product with a test application before the actual application of wood stain. To the shade affects tree species of the surface, absorption properties, amount of the applied wood stain, application method and number of applied coats. The best result is usually achieved with two coats. Remove light swelling of the surface by a light intersanding and vacuum-cleaning between coats. After the wood stain has dried the surface is ready to be top coated with Teknos parquet primers or one-pack parquet lacquers.

The surface to be treated must be dry. The moisture content of the wood should be 7 ±2 % by weight. During the application and drying period the temperature of the ambient air, the surface and the product shall be above +10°C and the relative air humidity below 80%.

Storage time: in unopened containers, above +1°C, for 2 years. Must not freeze.