Semigloss top coat for wood and metal

  • Wear resistant
  • Water-borne

Water-borne urethane alkyd based top coat for detached and fixed furniture indoors and outdoors. Finish: semigloss.

Indoors FUTURA AQUA 40 is suitable for primed and previously with alkyd paint painted wood, metal and building board surfaces: doors, window casements, cabinets, mouldings, panels, panel ceilings, air ducts, staircase railings, radiators and piping systems. Outdoors FUTURA AQUA 40 is suitable for painting primed window casements, doors, garden furniture etc. Indoors FUTURA AQUA 40 is also suitable for plaster and filler surfaces primed with FUTURA AQUA PRIMER, for example window sills and casings, and wall surfaces in special objects, e.g. staircases. Product meets the requirements of toy safety standard EN 71-3:2013 + A3:2018 for limit values for migration of chemical elements.

Surface preparation

Clean new surfaces from dust and dirt. Wash previously painted surfaces with RENSA SUPER paint cleaner. Matt down hard or gloss surfaces by sanding and thereafter remove the dust. Smooth any irregularities in the surface with SILORA A carpentry filler.


Stir thoroughly before use. Apply the paint once or twice with a varnish brush, mohair roller, painting pad or spray. When painting a smooth surface, e.g. flush door, the marks left by a roller may be smoothed down with painting pad or with varnish brush. Suitable airless nozzle size 0.011 - 0.013".

Application conditions

The surface to be treated has to be dry. During the application and drying period the temperature of the ambient air, the surface and the product shall be above +10°C and the relative air humidity below 80%. Drying is faster in low air humidity and/or above +21°C. Application will be easier if air is humidified and/or temperature is lowered in the working space. Ventilation after the painting will quicken the drying.


Must not freeze.
Solids abt. 40 % by volume
Volatile organic compound (VOC) EU VOC limit value (kat A/d): 130 g/l. The product's VOC: max. 130 g/l.
Gloss Semigloss
Tinting system Teknomix
Density abt. 1.3 g/ml
Practical spreading rate 8 - 10 m²/l.
Drying time – dust free 1 h
Drying time – through-dry 2 - 3 days
Thinner Water.
Clean up Warm water and RENSA BRUSH brush cleaner. Wash the equipment immediately after use.
Colours Base paints 1 (white) and 3, which can be tinted to obtain the shades in Interior Colour Card. Ready-made shades: NCS S 0502-Y. NCS S 0500-N.
Packages Base paints 1 and 3: 0.45 l, 0.9 l, 2.7 l, 9 l. NCS S 0500-N: 0.9 l, 2.7 l. NCS S 0502-Y: 2.7 l.
Safety markings See safety data sheet.
Approvals & certificates M1 classification,Finnish Key Flag