FÖNSTERFÄRG AQUA

NEW WOODEN SURFACE: Remove from the surface all loose matter. Remove possible mildew with mildew remover. PREVIOUSLY PAINTED OR OLD WOODEN SURFACE: Change deteriorated wooden parts with new ones. Remove loose matter, dirt and dust. Note, that the adhesion of an old thick paint layer to the substrate may have been weakened, therefore the paint should be removed although the paint film looks intact. The old paint layer is removed primarily by scraping or wire brushing and possibly by heating the surface with infra-red heater designed for that purpose. Secondarily paint remover or blasting can be used. Matt down hard or gloss surfaces by sanding and thereafter remove the dust. Wash surfaces with RENSA FACADE facade cleaner and rinse thoroughly.

Stir thoroughly before use. Apply two coats of FÖNSTERFÄRG AQUA. When painting windows apply an extra coat to the bottom frame. Paint also over putty and a couple of millimeters on glass. Apply the paint with a varnish brush, mohair roller, painting pad or spray. When painting a smooth surface, e.g. flush door, the marks left by a roller may be smoothed down with painting pad or with varnish brush. Suitable airless nozzle size 0.011 - 0.013".

The surface to be treated must be dry. During the application and drying period the temperature of the ambient air, the surface and the product shall be above +10°C and the relative air humidity below 80%. Drying is faster in low air humidity and/or above + 21°C. Application will be easier if air is humidified and/or temperature is lowered in the working space. Ventilation after the painting will quicken the drying.

Must not freeze.