TEKNODUR 9201-03

Polyurethan top coat

  • Corrosion protective
  • Special adhesion
  • 2-component
  • Solvent-borne
  • Topcoat

TEKNODUR 9201-03 is a two-pack polyurethane topcoat. The hardener is an aliphatic isocyanate resin.

TEKNODUR 9201-03 is a high quality and versatile topcoat for smooth and blasted steel surfaces.

TEKNODUR 9201-03 is a semi mat two-pack polyurethane topcoat with a very good adhesion on steel surfaces. It has good corrosion resistance, high finish quality and also a good weather resistance.

Technical data sheet

Surface preparation

Remove from the surface any contaminants that might be detrimental to surface preparation and coating. Remove also water-soluble salts by using appropriate methods. The surface should be prepared as follows: STEEL SURFACES: Remove mill scale and rust by blast cleaning to preparation grade Sa 2½ (standard ISO 8501-1). Roughening the surface of thin-plate improves the adhesion of the paint to the substrate. OLD PAINTED SURFACES SUITABLE FOR OVERCOATING: Any impurities that might be detrimental to the application of paint (e.g. grease and salts) are to be removed. The surface must be dry and clean. Old, painted surfaces that have exceeded the maximum over coating time are to be roughened as well. Damaged parts are prepared in accordance with the requirements of the substrate and the maintenance coating.
Solids abt. 45 % by volume
Volatile organic compound (VOC) abt. 490 g/l
Pot life 4 h (+23 °C)
Mixing ratio 7:1 by volume (comp. A : comp. B)
Hardener Comp. B: TEKNODUR HARDENER 7255 or TEKNODUR HARDENER 7235
Gloss Semi-matt
Drying time – dust free after 30 min
Drying time – touch dry after 4 h
Drying time – forced drying 60°C / 30 min
Thinner Standard dilution: TEKNOSOLV 6740
Clean up TEKNOSOLV 6740