HYDROPUR MERO 2595-02
Water-borne 2C top coat for interior use
- 2-component
- Water-borne
- Clear coat
MOTIVO MERO 2595 is a water-borne, scratch-resistant, 2C top coat with a natural wood effect. The product is resistant to light and yellowing.
Technical data sheet
Surface preparation
Every substrate must be well-cleaned, dry and free from grease and oil. Coating removal: Sand, strip
Application
Stir or shake the product well for several minutes before use, if necessary by machine.
Application conditions
Recommended temperature for surroundings and product: +15°C-25°C. Do not apply below +10°C.
Storage
Storage temperature is +5°C - +30°C. Store in a tightly closed container.
Application methods
For coarse-pored or coarse-textured woods, we recommend consulting an application engineer.
Not suitable for steamed woods.
Technical requirement: Adhesive strength according to DIN EN ISO 2409; Gt 0
| Volatile organic compound (VOC) | abt. 40 g/l |
|---|---|
| Pot life | 3 h (+23 °C) |
| Mixing ratio | 10:1 by volume (comp. A : comp. B) |
| Hardener | Comp. B: MOTIVO 3959-99 or PUR 4545-99 |
| Tinting system | Largo |
| Theoretical spreading rate | 80-100 g/m²; 11 m²/kg |
| Density | abt. 1 g/ml |
| Drying time – dust free | after 60 minutes |
| Drying time – touch dry | after 2 hours |
| Drying time – through-dry | after 3 days |
| Clean up | Wash the equipment immediately after use. Water, ACETON 8000-98. |
| Colours | Colourless. |
| Safety markings | See safety data sheet. |
| Gloss value | 2 |