VARIVA AQUA 8770-00 WIPE
Water-borne wipe stain
- Water-borne
- Stain
VARIVA AQUA 8770-00 WIPE wipe stain is a water-borne, ready-to-use, light-fast pigment stain that creates a rustic stain effect on coarse-pored woods such as oak and ash. VARIVA AQUA 8770-00 WIPE provides a pore-accentuating and rustic stain effect in wood shades and can also be used on fine-pored woods such as maple.
Surface preparation
Every substrate must be well-cleaned, dry and free from grease and oil. Coating removal: Sand, strip
Application
Stir or shake the product well for several minutes before use, if necessary by machine.
Application conditions
Recommended temperature for surroundings and product: +15°C-25°C. Do not apply below +10°C.
Storage
Storage temperature is +5°C - +30°C.
Before commencing work always test the product on the original wood. The shade depends on several factors such as the wood characteristics, wood shade, sanded finish etc.
Stains must always be fixed and protected with at least one coat of a clear coating. No intermediate sanding should be carried out before priming. The final colour shades are only obtained after priming, intermediate sanding and final coating with a clear coating and after drying at least overnight.
| Weight solids | abt. 7 % by weight |
|---|---|
| Volatile organic compound (VOC) | abt. 78 g/l |
| Tinting system | Largo |
| Density | abt. 1.01 g/ml |
| Drying time – dust free | after 60 minutes |
| Drying time – touch dry | after 60 minutes |
| Drying time - overcoatable | after 12-24 hours |
| Clean up | Wash the equipment immediately after use. Water, ACETON 8000-98. |
| Colours | Can be adjusted individually for customers by agreement. |
| Safety markings | See safety data sheet. |