UVILUX PUTTY 1465-20
Pigmented UV-curing putty
- 1-component
- Putty
- 1-component
- Putty
For repair of defects in hardwood flooring and mouldings.
UVILUX PUTTY 1465-20 is developed as a one-component putty with good surface and deepcure properties while fully opaque. The product also has very good filling and sanding properties.
Technical data sheet
Safety data sheet
- UVILUX PUTTY 1465-20_TS 20895 DARK BROWN_2025-04-16_EU_en
- UVILUX PUTTY 1465-20_TS 20895 DARK BROWN_2025-04-16_IE_en
- UVILUX PUTTY 1465-20_TS 20895 DARK BROWN_2025-04-16_MT_en
- UVILUX PUTTY 1465-20_TS 20895 DARK BROWN_2025-04-16_NI_en
- UVILUX PUTTY 1465-20_TS 20905 BLACK_2024-05-17_EU_en
- UVILUX PUTTY 1465-20_TS 20905 BLACK_2024-05-17_GB_en
- UVILUX PUTTY 1465-20_TS 20905 BLACK_2024-05-17_IE_en
- UVILUX PUTTY 1465-20_TS 20905 BLACK_2024-05-17_MT_en
- UVILUX PUTTY 1465-20_TS 20905 BLACK_2024-05-17_NI_en
- UVILUX PUTTY 1465-20_TS 21292 BROWN_2024-05-17_EU_en
- UVILUX PUTTY 1465-20_TS 21292 BROWN_2024-05-17_GB_en
- UVILUX PUTTY 1465-20_TS 21292 BROWN_2024-05-17_IE_en
- UVILUX PUTTY 1465-20_TS 21292 BROWN_2024-05-17_MT_en
- UVILUX PUTTY 1465-20_TS 21292 BROWN_2024-05-17_NI_en
- UVILUX PUTTY 1465-20_TS 21318 BROWN_2022-09-15_EU_en
- UVILUX PUTTY 1465-20_TS 21318 BROWN_2022-09-15_GB_en
- UVILUX PUTTY 1465-20_TS 21318 BROWN_2022-09-15_IE_en
- UVILUX PUTTY 1465-20_TS 21318 BROWN_2022-09-15_MT_en
- UVILUX PUTTY 1465-20_TS 21318 BROWN_2022-09-15_NI_en
- UVILUX PUTTY 1465-20_TS 21509 BLACK_2025-06-25_EU_en
- UVILUX PUTTY 1465-20_TS 21509 BLACK_2025-06-25_IE_en
- UVILUX PUTTY 1465-20_TS 21509 BLACK_2025-06-25_MT_en
- UVILUX PUTTY 1465-20_TS 21509 BLACK_2025-06-25_NI_en
Storage
Should not be exposed to temperatures above +40°C. Should not be exposed to direct sunlight. Store in a tightly closed container. Storage stability is 9 months in unopened package. Must not freeze.
Manual and automatic application.
Cures under UV-lamps, recommend using Gallium light source.
Product temperature is recommended to be above +50°C prior to curing. Increasing the energy density gives a higher cure-depth. Should not be heated above +70°C before UV curing. Temperature during curing should never exceed +130°C, otherwise final color can be affected.
| Total mass of solids | abt. 1300 g/l |
|---|---|
| Weight solids | abt. 99 % by weight |
| Volatile organic compound (VOC) | abt. 7 g/l |
| Thinner | The product is delivered ready for use. |
| Clean up | TEKNOSOLV 1129-11 |
| Colours | Opaque. |
| Safety markings | See safety data sheet. |