TEKNOHEAT PRIMER 1174
Silicon primer
- Corrosion protective
- Heat resistant
- 1-component
- Solvent-borne
- Primer
- Corrosion protective
- Heat resistant
- 1-component
- Solvent-borne
- Primer
TEKNOHEAT PRIMER 1174 is a one-component, solvent-borne primer based on a combination of silicone resin and other binders.
It provides excellent adhesion and good corrosion protection and is intended for use as a primer for TEKNOHEAT 1178 in high-temperature coating systems. In combination with TEKNOHEAT 1178, the primer offers thermal resistance with short-term exposure up to 500 °C.
Technical data sheet
Surface preparation
Remove from the surfaces any contaminants that might be detrimental to surface preparation and application. Remove also water-soluble salts by using appropriate methods. The surfaces are prepared according to the different materials as follows:
STEEL SURFACES: Remove mill scale and rust by blast cleaning to preparation grade Sa 2½ (standard ISO 8501-1). Roughening the surface of thin-plate improves the adhesion of the paint to the substrate.
The place and time of the preparation are to be chosen so that the prepared surface will not get dirty or damp before the subsequent treatment.
Additional instructive information for surface preparation can be found in standards EN ISO 12944-4 and ISO 8501-2.
Application
Stir thoroughly before use.
Application conditions
The surface to be treated must be dry. During the application and drying period the temperature of the ambient air, the surface and the product shall be above +5°C and the relative air humidity below 80%. Additionally, the temperature of the surface to be treated and the product must be at least +3°C above the dew point of the ambient air.
Storage
The storage stability is shown on the label. Store in a cool place and in tightly closed containers.
| Solids | abt. 26 % by volume |
|---|---|
| Weight solids | abt. 46 % by weight |
| Volatile organic compound (VOC) | abt. 640 g/l |
| Gloss | Matt |
| Density | abt. 1.19 g/ml |
| Practical spreading rate | The values depend on the application technique, surface conditions, overspray, etc. |
| Drying time – dust free | 1 h |
| Thinner | TEKNOSOLV 6750 |
| Clean up | TEKNOSOLV 6750 |
| Colours | Silver. |
| Safety markings | See safety data sheet. |