TEKNOFILL 5800-00
Water-borne putty
- 1-component
- Water-borne
- Putty
TEKNOFILL 5800-00 is a water-borne one-component putty for plywood. It is intended for automatic lines. TEKNOFILL 5800-00 fills holes and it is ready for the sanding after 30 minutes drying.
Technical data sheet
Surface preparation
The surface must be clean and dry.
Application conditions
During the application and drying period the temperature of the ambient air, the surface and the product shall be above +15°C and the relative air humidity below 80%.
Storage
Must not freeze. The best storage temperature is +10°C - +25°C.
TEKNOFILL 5800-00 is intended to be applied using an automatic line.
| Total mass of solids | abt. 990 g/l |
|---|---|
| Volatile organic compound (VOC) | abt. 7 g/l |
| Clean up | Water or TEKNOSOLV 1935. |
| Colours | White. |
| Safety markings | See safety data sheet. |