SUPREMO STRUKTURLACK 3908-30
Solvent-based, textured 2C top coat for interior use
- 2-component
- Solvent-borne
- Clear coat
- 2-component
- Solvent-borne
- Clear coat
SUPREMO STRUKTURLACK 3907 / 3908 is a solvent-based, textured 2C top coat with excellent adhesion. The product is suitable as a top coat for clear or pigmented surfaces to create a high quality textured surface. Texture types: 3907 coarse structure 3908 fine structure
Surface preparation
Every substrate must be well-cleaned, dry and free from grease and oil. Coating removal: Sand, strip
Application
Stir or shake the product well for several minutes before use, if necessary by machine.
Application conditions
Recommended temperature for surroundings and product: +15°C-25°C. Do not apply below +10°C.
Storage
Storage temperature is +5°C - +30°C.
On MDF boards with a density of below 700 kg/m³ the surface must be pre-isolated with ALPOLAN UNIVERSALGRUND 2420-00. Strengthen the edges or milled grooves with ALPOLAN UNIVERSALGRUND 2420-00. Moisture-resistant wood based materials must be used for rooms with a high moisture exposure (e.g. kitchens, bathrooms etc.). This product should not be used on horizontal surfaces in these areas.
CAUTION: On dark surfaces (e.g. black MDF) clouding may occur depending on the applied quantity and application method.
Effect coatings should only be applied by air atomisation, e.g. with a gravity feed gun or a low-pressure double diaphragm pump.
Please refer to the instructions in the process data sheet "Large-area coatings with effect coatings" (VTM 4126).
| Weight solids | abt. 26 % by weight |
|---|---|
| Volatile organic compound (VOC) | abt. 704 g/l |
| Pot life | 8 h (+23 °C) |
| Hardener | Comp. B: UNIPUR 279 1910-99 |
| Tinting system | Largo |
| Theoretical spreading rate | 120 g/m²; 8.3 m²/kg |
| Density | abt. 0.94 g/ml |
| Mixing ratio by weight | 10:1 |
| Drying time – dust free | after 15 minutes |
| Drying time – touch dry | after 30 minutes |
| Drying time – through-dry | after 10-14 days |
| Thinner | VERDÜNNER 1300-98, VERDÜNNER 0950-98. |
| Clean up | Wash the equipment immediately after use. VERDÜNNER 1000-98 or UNIVERSALREINIGER U 8600-98. |
| Colours | Colourless. |
| Safety markings | See safety data sheet. |
| Approvals & certificates | EN 71-3 |
| Gloss value | 30 |