RENSA FLOOR POLISH 4580-30
Polymer dispersion for the care and maintenance of all parquet and cork floors with a water-resistant finish
RENSA FLOOR POLISH 4580-30 is a polymer dispersion for the care and maintenance of all parquet and cork floors with a water-resistant finish. Maintains and protects old floors, restoring their (satin) matt or matt finish. Enhances the natural grain of the floor and intensifies its colour.
pH value: approx. 8.5 (concentrate) Information on contained substances (according to EU recommendations): Less than 5 % non-ionic surfactants. Additional ingredients: Care ingredients, auxiliaries and fragrances.
Technical data sheet
Safety data sheet
Surface preparation
Every substrate must be well-cleaned, dry and free from grease and oil.
Application
Shake or stir product well before use.
Application conditions
Recommended temperature for surroundings and product: +15°C-25°C. Do not apply below +10°C. Ideal surface and object temperature for application: +18°C-22°C. Avoid application in direct sunlight. Underfloor heating systems must be adjusted well in advance.
Maintenance
Initial care: Wait for at least 3 weeks before thoroughly cleaning hardwood floors. If the floor is very dirty, use RENSA PRO CLEAN 4582-00 as a pre-treatment.
Let dry for at least 12 h, ideally overnight.
Maintenance: Remove dirt and dust with a vacuum and/or by mopping.
Add 1 part of RENSA FLOOR POLISH 4580-30 to 5 l of cleaning water (equivalent to 2%).
Also refer to our brochure "Perfect parquet floor care".
Storage
Storage temperature is +5°C - +30°C. Store in a tightly closed container.
The product can slightly accentuate the natural grain of the floor and can intensify its colour.
Not suitable for floors treated with oxidative or UV oils.
Spot test at an inconspicuous place as a precaution.
If necessary, carry out basic cleaning with RENSA PRO CLEAN 4582-00.
| Weight solids | abt. 50 % by weight |
|---|---|
| Theoretical spreading rate | 25 g/m²; 40 m²/kg |
| Density | abt. 1.01 g/ml |
| Drying time – dust free | after 40 minutes |
| Drying time – touch dry | after 3 hours |
| Drying time – through-dry | after 6 days |
| Drying time - overcoatable | after 1 day |
| Clean up | Wash the equipment immediately after use. |
| Colours | Colourless. |
| Safety markings | See safety data sheet. |
| Gloss value | 30 |