PLATIN ANTIGLISS 4546-15
Water-borne 2C PU sealing coating for interior use
- 1-component
- Water-borne
- Sealer
- 1-component
- Water-borne
- Sealer
PLATIN ANTIGLISS 4546 is a textured, water-borne, highly abrasion-resistant 2C-PU floor sealing coating for low-emission treatment of practically all soft, hard and exotic wood species. The product is resistant to light and yellowing.
Safety data sheet
- PLATIN ANTIGLISS 4546-15_2021-06-30_GB_en
- PLATIN ANTIGLISS 4546-15_2025-01-14_EU_en
- PLATIN ANTIGLISS 4546-15_2025-01-14_IE_en
- PLATIN ANTIGLISS 4546-15_2025-01-14_MT_en
- PLATIN ANTIGLISS 4546-15_2025-01-14_NI_en
- PLATIN ANTIGLISS 4546-15_FARBLOS-INCOLORE-COLOURLESS_2025-06-26_EU_en
- PLATIN ANTIGLISS 4546-15_FARBLOS-INCOLORE-COLOURLESS_2025-06-26_IE_en
- PLATIN ANTIGLISS 4546-15_FARBLOS-INCOLORE-COLOURLESS_2025-06-26_MT_en
- PLATIN ANTIGLISS 4546-15_FARBLOS-INCOLORE-COLOURLESS_2025-06-26_NI_en
Surface preparation
Every substrate must be well-cleaned, dry and free from grease and oil. Coating removal: Sand
Application
Stir or shake the product well for several minutes before use, if necessary by machine.
Application conditions
Recommended temperature for surroundings and product: +15°C-25°C. Do not apply below +10°C. Ideal surface and object temperature for application: +18°C-22°C. Avoid application in direct sunlight. Underfloor heating systems must be adjusted well in advance.
Maintenance
Initial and maintenance care: After at least 3 weeks curing time with RENSA FLOOR POLISH 4580.
Storage
Storage temperature is +5°C - +30°C. Store in a tightly closed container.
When renovating or coating exotic wood species, we recommend using RENO GRUND 3300.
Do not use on pear wood without a primer. Risk of film formation faults.
When using on dark woods please refer to the instructions in our VTM 5564 "White discolouration” in the areas around the joints of sealed dark wood floors.
| Weight solids | abt. 31 % by weight |
|---|---|
| Volatile organic compound (VOC) | abt. 113 g/l |
| Pot life | 2 h (+23 °C) |
| Mixing ratio | 10:1 by volume (comp. A : comp. B) |
| Hardener | Mix in hardener mechanically for several minutes. Comp. B: PUR 4545-99 |
| Theoretical spreading rate | 120 g/m²; 8.3 m²/kg |
| Density | abt. 1.06 g/ml |
| Drying time - overcoatable | after 4 hours |
| Clean up | Wash the equipment immediately after use. Water, VERDÜNNER 1000-98. |
| Colours | Colourless. |
| Safety markings | See safety data sheet. |
| Approvals & certificates | Swiss environmental label UE II, class C |
| Gloss value | 15 |