OWOSUN UV 1239-15
2C-UV top coat for interior use
- 2-component
- Water-borne
- Coating
OWOSUN UV 1239 is an opaque, water-borne 2C UV top coat which has a touch dry surface even before UV curing. By combining two curing mechanisms (2C-PUR and UV), sufficiently good curing is achieved even in low irradiation areas. Full resistance is only achieved by combining both curing mechanisms.
Technical data sheet
Surface preparation
Every substrate must be well-cleaned, dry and free from grease and oil. Coating removal: Sand
Application
Stir or shake the product well for several minutes before use, if necessary by machine.
Application conditions
Recommended temperature for surroundings and product: +15°C-25°C. Do not apply below +10°C.
Storage
Storage temperature is +5°C - +30°C. Store in a tightly closed container.
| Weight solids | abt. 37 % by weight |
|---|---|
| Volatile organic compound (VOC) | abt. 17 g/l |
| Pot life | 3 h (+23 °C) |
| Hardener | Comp. B: OWEDUR 5061-99 |
| Tinting system | Largo |
| Theoretical spreading rate | 120-180 g/m²; 6.6 m²/kg |
| Density | abt. 1.18 g/ml |
| Mixing ratio by weight | 20:1 |
| Thinner | SPEZIALVERDÜNNER 1020-98 |
| Clean up | Wash the equipment immediately after use. Water, REINIGER 5064-98 or ACETON 8000-98. |
| Colours | Available in all RAL and NCS-S colours or at your request. |
| Safety markings | See safety data sheet. |
| Gloss value | 15 |