OWOHNEDUR 8301-90
Water-borne 2C high-gloss coating for interior use
- 2-component
- Water-borne
- Clear coat
- 2-component
- Water-borne
- Clear coat
OWOHNEDUR 8301-90 is a fast-drying, water-borne 2C high-gloss coating. The product has a deep-acting effect and is characterised by an appealing surface with a good mechanical strength. The coating is resistant to household chemicals and mechanical stress.
Surface preparation
Every substrate must be well-cleaned, dry and free from grease and oil.
Application
Stir or shake the product well for several minutes before use, if necessary by machine.
Application conditions
Recommended temperature for surroundings and product: +15°C-25°C. Do not apply below +10°C. Ideal relative humidity 50-60%.
Storage
Storage temperature is +5°C - +30°C. Store in a tightly closed container.
We recommend using a spray gun with a nozzle size of up to 1.4 mm.
A uniform surface can be achieved by applying in cross layers.
The gloss level of the surface is affected by the techniques used: Layer thickness, spraying technique and drying conditions.
We recommend carrying out a spray test with the product before starting work.
Important information:
The recommendations in the data sheets "7 days – 7 steps" (VTM 4275) and "10 tips for high-gloss coating" (VTM 4120) must always be observed.
| Weight solids | abt. 28 % by weight |
|---|---|
| Pot life | 2 h (+23 °C) |
| Hardener | Mix in hardener mechanically for several minutes. Comp. B: OWEDUR 1058-99 |
| Tinting system | Largo;Teknocolor |
| Theoretical spreading rate | 200-220 g/m²; 4.7 m²/kg |
| Density | abt. 1.04 g/ml |
| Mixing ratio by weight | 3:1 |
| Drying time – dust free | after 30 minutes |
| Drying time – through-dry | after 14 days |
| Drying time - overcoatable | after 60 minutes |
| Clean up | Wash the equipment immediately after use. Water, REINIGER 5064-98 or ACETON 8000-98. |
| Colours | Colourless. |
| Safety markings | See safety data sheet. |
| Gloss value | 90 |