OWOGRIP 4394-10
Solvent-based, textured 2C top coat for interior use
- 2-component
- Solvent-borne
- Primer
- Topcoat
OWOGRIP 4394 is a solvent-based, textured 2C top coat with excellent filling properties for creating metallic surfaces. The product has a high elasticity and is resistant to mechanical stress. The coating is ring-resistant and has a high resistance to metal abrasion, also without recoating.
Technical data sheet
Surface preparation
Every substrate must be well-cleaned, dry and free from grease and oil. Coating removal: Sand, strip
Application
Stir or shake the product well for several minutes before use, if necessary by machine.
Application conditions
Recommended temperature for surroundings and product: +15°C-25°C. Do not apply below +10°C.
Storage
Storage temperature is +5°C - +30°C. Store in a tightly closed container.
Effect paints should only be applied using air atomisation, e.g. with a flow cup gun or a low-pressure double diaphragm pump.
Please observe the technical data sheet ‘Large-area coatings with effect paints’ (VTM 4126).
| Weight solids | abt. 50 % by weight |
|---|---|
| Volatile organic compound (VOC) | abt. 537 g/l |
| Pot life | 3 h (+23 °C) |
| Hardener | Comp. B: OWEDUR 5093-99 |
| Tinting system | Largo |
| Theoretical spreading rate | 120 g/m²; 8.3 m²/kg |
| Density | abt. 1.01 g/ml |
| Mixing ratio by weight | 2:1 |
| Drying time – dust free | after 20 minutes |
| Drying time – touch dry | after 90 minutes |
| Drying time – through-dry | after 10-14 days |
| Thinner | OWEDUR 5046-98 |
| Clean up | Wash the equipment immediately after use. OWEDUR 5046-98 |
| Colours | Available in all RAL and NCS-S colours or at your request. |
| Safety markings | See safety data sheet. |
| Gloss value | 10 |