OWEDUR 4350-90
Solvent-based 2C high-gloss coating for interior use
- 2-component
- Solvent-borne
- Primer
- Topcoat
- 2-component
- Solvent-borne
- Primer
- Topcoat
OWEDUR 4350 is a solvent-based 2C high-gloss coating for top-class interiors. The product has a deep-acting effect and is characterised by an appealing surface with a good mechanical strength. The coating is resistant to household chemicals and mechanical stress.
Surface preparation
Every substrate must be well-cleaned, dry and free from grease and oil. Coating removal: Sand, strip
Application
Stir or shake the product well for several minutes before use, if necessary by machine.
Application conditions
Recommended temperature for surroundings and product: +15°C-25°C. Do not apply below +10°C.
Storage
Storage temperature is +5°C - +30°C. Store in a tightly closed container.
The room temperature should be between 18 and 25°C. Ideal relative humidity 50-60%.
Always filter the high-gloss coating through a 50 µm sieve before filling the spray gun.
We recommend using a spray gun with a nozzle size of up to 1.4 mm.
A uniform surface can be achieved by applying in cross layers.
The gloss level of the surface is affected by the techniques used: Layer thickness, spraying technique and drying conditions.
We recommend carrying out a spray test with the product before starting work.
Important information:
The recommendations in the data sheets "7 days – 7 steps" (VTM 4275) and "10 tips for high-gloss coating" (VTM 4120) must always be observed.
Important: OWEDUR 5037-99 is sensitive to humidity. Close the container immediately after use.
| Weight solids | abt. 48 % by weight |
|---|---|
| Volatile organic compound (VOC) | abt. 526 g/l |
| Pot life | 2 h (+23 °C) |
| Hardener | Comp. B: OWEDUR 5037-99 |
| Tinting system | Largo |
| Theoretical spreading rate | 120 g/m²; 8.3 m²/kg |
| Density | abt. 0.97 g/ml |
| Mixing ratio by weight | 3:1 |
| Drying time – dust free | after 60 minutes |
| Drying time – touch dry | after 60 minutes |
| Drying time – through-dry | after 10 hours |
| Drying time - overcoatable | after 12 hours |
| Thinner | OWEDUR 5046-98, VERDÜNNER 0950-98, VERDÜNNER 5500-98. |
| Clean up | Wash the equipment immediately after use. OWEDUR 5046-98 |
| Colours | Available in all RAL and NCS-S colours or at your request. |
| Safety markings | See safety data sheet. |
| Gloss value | 90 |