MATTÖL NORDIC 1411-15
Solvent-based, high-quality preservative oil for wood substrates for interior use
- Solvent-borne
- Oil
MATT OIL NORDIC 1411-15 is a low-viscosity, slightly lightening, matt preservative oil based on natural raw materials. The product has a good mechanical strength. Parquet floors: For treating the surfaces of wooden floors, stairs and cork floors. Carpenter application: For surface treatment of wooden doors, tables, chairs and stairs.
Technical data sheet
Surface preparation
Every substrate must be well-cleaned, dry and free from grease and oil. Coating removal: Sand
Application
Stir or shake the product well for several minutes before use, if necessary by machine.
Application conditions
Recommended temperature for surroundings and product: +15°C-25°C. Do not apply below +10°C. Ideal surface and object temperature for application: +18°C-22°C. Avoid application in direct sunlight. Underfloor heating systems must be adjusted well in advance.
Maintenance
Parquet floors:
Maintenance: After at least 3 weeks curing time with RENSA WOOD OIL POLISH 4584-00. Re-impregnate with RENSA WOOD CARE OIL 1413.
Carpenter application:
Maintenance: After a minimum period of 3 weeks by wiping surfaces with a damp cloth (not wet). As required, e.g. weekly, add approx. 1% RENSA WOOD OIL POLISH 4584-00 to the cleaning water (2 caps to 1l of water). Cleans and nourishes the oiled surface. Re-impregnate with RENSA WOOD CARE OIL 1413.
Storage
Storage temperature is +5°C - +30°C. Store in a tightly closed container.
Hazard warning:
Pads and cloths soaked in oil can spontaneously combust under certain conditions and should therefore be kept in a metal bin with a lid until they are disposed of correctly.
| Weight solids | abt. 37 % by weight |
|---|---|
| Volatile organic compound (VOC) | abt. 541 g/l |
| Pot life | 4 h (+23 °C) |
| Mixing ratio | 10:1 by volume (comp. A : comp. B) |
| Hardener | 10% UNIPUR 279/1910-99 HÄRTER can be added to improve mechanical and chemical resistance. |
| Tinting system | Largo |
| Theoretical spreading rate | 75 g/m²; 13.3 m²/kg |
| Density | abt. 0.86 g/ml |
| Drying time – dust free | after 2 hours |
| Drying time – through-dry | after 7 days |
| Drying time - overcoatable | after 6-8 hours |
| Clean up | Wash the equipment immediately after use. TERPENTINERSATZ 4214-98 |
| Colours | Colourless. |
| Safety markings | See safety data sheet. |
| Approvals & certificates | Swiss environmental label UE II, class F |
| Gloss value | 15 |