ISOFILL 1070-00
Solvent-based 2C isolating filler for interior use
- 2-component
- Solvent-borne
- Filler
- 2-component
- Solvent-borne
- Filler
ISOFILL 1070-00 is a solvent-based, 2C isolating filler with excellent filling properties. The coating is ideal for wetrooms due to its isolating effect. As it is particularly viscous, the product is especially suitable for applications on vertical surfaces.
When used as a flame retardant coating for seagoing ships according to SOLAS (International Convention for the Safety of Life at Sea) 74/88 Reg. II-2/3, II-2/5 and II-2/6, latest version, IMO Resolution MSC.36(63)-(1994 HSC Code)7, IMO Resolution MSC.97(73)-(2000 HSC Code)7, this product can only be combined with other approved and technically suitable products. A risk assessment has been carried out according to Directive 2014/90/EU, Annex II, Section 3. The cured and dried coating poses neither a physical nor a health hazard, nor a hazard to the environment. When used in ship interiors, the maximum total product application quantity of 200 g/m² should never be exceeded.
Technical data sheet
Surface preparation
Application
Application conditions
Storage
| Weight solids | abt. 56 % by weight |
|---|---|
| Volatile organic compound (VOC) | abt. 554 g/l |
| Pot life | 2 h (+23 °C) |
| Hardener | Comp. B: UNIPUR 279 1910-99 |
| Tinting system | Largo |
| Theoretical spreading rate | 180 g/m²; 5.5 m²/kg |
| Density | abt. 1.32 g/ml |
| Mixing ratio by weight | 10:1 |
| Drying time – dust free | after 10 minutes |
| Drying time – touch dry | after 60 minutes |
| Drying time - overcoatable | after 4 hours |
| Thinner | VERDÜNNER 1300-98, VERDÜNNER 0950-98, VERDÜNNER 5500-98. |
| Clean up | Wash the equipment immediately after use. VERDÜNNER 0950-98, VERDÜNNER 1300-98, VERDÜNNER 5500-98. |
| Colours | White. |
| Safety markings | See safety data sheet. |
| Approvals & certificates | IMO FTPC Part 5,Marine Equipment Approval (Module B) |