HYDROPUR 2K COLOR 7515-20
Water-borne 2C top coat for interior and exterior use
- 2-component
- Water-borne
- Topcoat
- 2-component
- Water-borne
- Topcoat
HYDROPUR 2K COLOR 7515-20 is a fast-drying, water-borne 2C top coat. The coating is very weather-resistant. The product is characterised by its high elasticity and good block resistance.
Technical data sheet
Safety data sheet
- HYDROPUR 2K COLOR 7515-20_2019-07-02_CN_en
- HYDROPUR 2K COLOR 7515-20_2019-07-02_MY_en
- HYDROPUR 2K COLOR 7515-20_2019-07-02_PL_en
- HYDROPUR 2K COLOR 7515-20_2022-04-28_FI_en
- HYDROPUR 2K COLOR 7515-20_2022-10-06_GB_en
- HYDROPUR 2K COLOR 7515-20_2024-02-28_EU_en
- HYDROPUR 2K COLOR 7515-20_2024-02-28_IE_en
- HYDROPUR 2K COLOR 7515-20_2024-02-28_MT_en
- HYDROPUR 2K COLOR 7515-20_2024-02-28_NI_en
Surface preparation
Every substrate must be well-cleaned, dry and free from grease and oil. Coating removal: Sand, strip
Application
Stir or shake the product well for several minutes before use, if necessary by machine.
Application conditions
Recommended temperature for surroundings and product: +15°C-25°C. Do not apply below +10°C.
Storage
Storage temperature is +5°C - +30°C. Store in a tightly closed container.
Note:
When applying a white or pastel-coloured coating to surfaces subject to considerable wear we recommend overcoating with 2C clear coatings to improve ring resistance (metal wear).
To extend the durability of the coating, we recommend overcoating with HYDROPUR 2K 7590.
After the last application of HYDROPUR 2K COLOR 7515, do not wait any longer than 72 hours at max. +25°C before recoating with HYDROPUR 2K 7590. Intermediate sanding is otherwise necessary.
Technical requirement: Adhesive strength according to DIN EN ISO 2409; Gt 0
| Weight solids | abt. 47 % by weight |
|---|---|
| Volatile organic compound (VOC) | abt. 39 g/l |
| Pot life | 1 h (+23 °C) |
| Mixing ratio | 10:1 by volume (comp. A : comp. B) |
| Hardener | Comp. B: HYDROPUR 7515-99 |
| Gloss | Matt |
| Tinting system | Largo |
| Theoretical spreading rate | 100-200 g/m²; 6.6 m²/kg |
| Density | abt. 1.21 g/ml |
| Drying time – dust free | after 60 minutes |
| Drying time – touch dry | after 90 minutes |
| Drying time – through-dry | after 24 hours |
| Drying time - overcoatable | after 3 hours |
| Clean up | Wash the equipment immediately after use. Water, ACETON 8000-98. |
| Colours | Available in all RAL and NCS-S colours or at your request. |
| Safety markings | See safety data sheet. |
| Gloss value | 20 |