FORME
Parquet primer
- Varnish
- Varnish
Water-borne primer.
FORME is suitable for priming parquet and wooden floors using all application methods. To be used in combination with Teknos parquet lacquers.
Technical data sheet
Safety data sheet
Other product specific documents
Application
Sand the wooden surface properly, finish with sandpaper n:o 100 or finer. Fill the gaps with GAP Parquet putty during the intersanding process. After finishing sanding, apply a coat of FORME primer with a stainless steel trowel, felt trowel, lacquer brush or roller.
Steel trowel application: Apply 3–4 coats. If needed, intersand between coats with, for example, abrasive net or sandpaper grit 120.
Felt trowel, lacquer roller or brush application: Apply one coat. Intersand between coats with, for example, abrasive net or sandpaper grit 120. If needed, apply another coat with a steel trowel.
After priming, finish with Teknos water-based parquet lacquer. Ensure that the primer has fully dried before applying the top lacquer.
Water-borne primers may cause slight swelling of the wooden surface. If an absolutely smooth surface is desired, sand the surface lightly after the first lacquer coat.
Application conditions
The surface to be varnished has to be dry. The moisture content of the wood should be 7 ±2 % by weight. The temperature of the air, the surface and the lacquer shall be above +18 - 24°C and the relative humidity of the air 40 - 60% during the time of application and drying.
Storage
Storage time: in unopened containers, above +1°C, for 1 year. MUST NOT FREEZE.
| Solids | abt. 31 % by volume |
|---|---|
| Volatile organic compound (VOC) | EU VOC limit value (kat A/i): 140 g/l. The product's VOC: max. 140 g/l. |
| Density | abt. 1 g/ml |
| Thinner | Water |
| Clean up | Wash the equipment immediately after use with water and RENSA BRUSH brush cleaner. |
| Packages | Clear: 5 l. |
| Safety markings | See Safety Data Sheet. |
| Approvals & certificates | Finnish Key Flag,M1 classification |