ETERNO 3600-30
Glazing, Water-borne coating for pre-greying of facades
- 1-component
- Water-borne
- Coating
- 1-component
- Water-borne
- Coating
ETERNO 3600-30 is an opaque, water-borne and weather-resistant wood coating with good block resistance. ETERNO 3600-30 is a double-layer medium-coat system based on the latest highly cross-linking raw materials. Designed for industrial processing. Treatment of wooden surfaces with ETERNO 3600-30 prevents soiling. The low-emission coating does not release substances such as formaldehyde, monomers or other irritant substances.
Treatment of wooden surfaces with ETERNO 3600-30 prevents soiling.
Surface preparation
Every substrate must be well-cleaned, dry and free from grease and oil. Coating removal: Sand, sandblast
Application
Stir or shake the product well for several minutes before use, if necessary by machine.
Application conditions
Recommended temperature for surroundings and product: +15°C-25°C. Do not apply below +10°C.
Storage
Storage temperature is +5°C - +30°C. Store in a tightly closed container.
| Weight solids | abt. 46 % by weight |
|---|---|
| Volatile organic compound (VOC) | abt. 24 g/l |
| Tinting system | Largo;Teknocolor |
| Theoretical spreading rate | 100-120 g/m²; 9.0 m²/kg |
| Density | abt. 1.25 g/ml |
| Drying time – dust free | after 60 minutes |
| Drying time - overcoatable | after 12 hours |
| Thinner | SPEZIALVERDÜNNER 1020-98 |
| Clean up | Wash the equipment immediately after use. |
| Colours | Available in all RAL and NCS-S colours or at your request. |
| Safety markings | See safety data sheet. |
| Gloss value | 30 |