DRYWOOD OPTIFINISH G70

Topcoat for spray application

  • Low-temperature curing
  • Water resistant
  • Water-borne
  • Topcoat
»
  • Low-temperature curing
  • Water resistant
  • Water-borne
  • Topcoat

DRYWOOD OPTIFINISH G70 is an industrial water-borne gloss intermediate and topcoat for interior and exterior wooden joinery and other wood constructions. DRYWOOD OPTIFINISH G70 can be used as an industrial topcoat system within BRL0817 (Conept III).

DRYWOOD Optifinish G70 can be applied by Airmix (aircoat) or airless by hand or in automatic spraying equipment. DRYWOOD Optifinish G70 will typically be applied on pre-treated substrates such as softwood, hardwood, Accoya and modified wood. All softwood and non-durable hardwood for exterior use should be treated with a wood preservative. When re-coating / re-treating an intermediate sanding must be carried out. Use Drywood Optifinish as a primer/intermediate on Accoya. Exterior durability of coating systems including DRYWOOD Optifinish G70 is typically documented according to BRL0814/0817.

DRYWOOD OPTIFINISH G70 is a quick drying product, has a good adhesion, high durability, very low water uptake, good elasticity, and gloss retention. The product has nice filling and leveling properties, is easy to sand, and has good overcoatability properties. It also has good blocking properties, surface hardness, and scratch resistance. Before use, the manufacturer or technical service department should be consulted to confirm the product’s suitability for the specific substrate, coating system, and exposure conditions.