BASEMENT
Basement paint
- Water-borne
- Water-borne
Water-borne, matt paint for ceilings and walls in basic indoor areas e.g. basements, garages and car parks.
For painting of new plaster, concrete, sprayed concrete, building board, brick and gypsum board surfaces, as well as for previously painted ceilings and walls when a matt surface is needed.
Technical data sheet
Surface preparation
Clean new surfaces from dust and dirt. Wash previously painted surfaces with RENSA SUPER paint cleaner. For smoothing of irregularities in the surface choose a suitable filler from the SILORA series. The dried filler is sanded down and the dust removed.
Application
Stir thoroughly before use. Apply once or twice.
Application conditions
The surface to be treated must be dry. During the application and drying period the temperature of the ambient air, the surface and the product shall be above +5°C and the relative air humidity below 80%. Good ventilation during the application and drying period quickens the drying process.
Storage
Must not freeze.
| Solids | abt. 35 % by volume |
|---|---|
| Volatile organic compound (VOC) | EU VOC limit value (cat A/a): 30 g/l. The product's VOC: max. 30 g/l. |
| Gloss | Matt |
| Density | abt. 1.6 g/ml |
| Practical spreading rate | Previously painted surface: 7 - 10 m²/l. Filler and wood fibre board: 5 - 8 m²/l. Concrete and plastered surface: 4 - 7 m²/l. |
| Drying time – dust free | ½ h |
| Drying time - overcoatable | 2 h |
| Thinner | Water. |
| Clean up | Warm water and RENSA BRUSH brush cleaner. Wash the equipment immediately after use. |
| Colours | White. |
| Packages | White: 10 l. |
| Safety markings | See safety data sheet. |
| Approvals & certificates | Finnish Key Flag |