ALPOFILL 2010-00
Solvent-based 2-component insulating filler for interior use
- 2-component
- Solvent-borne
- Filler
ALPOFILL 2010-00 is a solvent-based 2-component insulating filler with very high filling power and very good levelling. The product has very good sandability even after several weeks. Due to its insulating effect, the coating is ideal for damp rooms and can also be used on wood rich in ingredients. Thanks to its high stability, the product is particularly suitable for applications on vertical surfaces.
For MDF boards with a bulk density <700 kg/m³, we recommend pretreating the edges with UNIVERSALGRUND 2420-00.
Technical data sheet
Surface preparation
Every substrate must be well-cleaned, dry and free from grease and oil. Coating removal: Sand, strip
Storage
Storage temperature is +5°C - +30°C.
| Weight solids | abt. 53 % by weight |
|---|---|
| Volatile organic compound (VOC) | abt. 572 g/l |
| Pot life | 5 h (+23 °C) |
| Hardener | Comp. B: UNIPUR 279 1910-99 |
| Tinting system | Teknotint |
| Theoretical spreading rate | 200 g/m²; 5 m²/kg |
| Density | abt. 1.23 g/ml |
| Mixing ratio by weight | 10:1 |
| Drying time – dust free | after 10 minutes |
| Drying time – touch dry | after 60 minutes |
| Drying time – through-dry | after 48 hours |
| Drying time - overcoatable | after 5 hours |
| Thinner | VERDÜNNER 0950-98, VERDÜNNER 1300-98. |
| Clean up | Wash the equipment immediately after use. UNIVERSALREINIGER U 8600-98 |
| Colours | Colourless, white, red, blue, green, yellow and black. |
| Safety markings | See safety data sheet. |