TEKNOSEAL 4002-00
Sealer for spray application
- Water-borne
- Sealer
- Water-borne
- Sealer
TEKNOSEAL 4002-00, a water-borne industrial sealer for the treatment of exterior grade MDF/HDF, wood, and wood-based materials for windows and doors.
TEKNOSEAL 4002-00 can be applied by by all conventional spraying systems - both hand spraying and automated spraying system. TEKNOSEAL 4002-00 will typically be applied on wood based boards.
TEKNOSEAL 4002-00 inhibits water / humidity ingress and provides dimensional stability. Before use, the manufacturer or technical service department should be consulted to confirm the product’s suitability for the specific substrate, coating system, and exposure conditions.
Surface preparation
The material must be clean and free from wood dust and contamination. All parts must be pre-treated with a Teknos primer and to secure optimum effect all milled grooves and cut edges must be pre-treated by brush with TEKNOSEAL 4002 before they are sprayed.
Application conditions
Stir thoroughly before use.
Optimum temperature for products and surroundings: +15°C - +30°C. Optimum relative humidity of the air is 50-70%.
Wet film range 175-200 µm.
Storage
Storage temperature is +5°C - +30°C. Shelf life in unopened containers: See “Best before date” on the label. Keep containers tightly closed after use.
| Solids | abt. 33 % by volume |
|---|---|
| Volatile organic compound (VOC) | abt. 29 g/l |
| Theoretical spreading rate | 5 m²/l |
| Clean up | Water. |
| Colours | Colourless. |
| Packages | 1 l, 3 l, 10 l, 20 l. |
| Safety markings | See safety data sheet. |
| Approvals & certificates | EPD |