MINOPRIMER AQUA 6700-00
Water-borne 1C primer for mineral substrates for interior use
- 1-component
- Water-borne
- Primer
- 1-component
- Water-borne
- Primer
Surface preparation
Every substrate must be well-cleaned, dry and free from grease and oil. Coating removal: Sand
Application
Stir or shake the product well for several minutes before use, if necessary by machine.
Application conditions
Recommended temperature for surroundings and product: +15°C-25°C. Do not apply below +10°C. Ideal surface and object temperature for application: +18°C-22°C. Avoid application in direct sunlight. Underfloor heating systems must be adjusted well in advance.
Storage
Storage temperature is +5°C - +30°C. Store in a tightly closed container.
Primed surfaces must be sealed within 48 hours.
The required quantity depends greatly on the absorbency and porosity of the substrates and may therefore vary
Not suitable on non-absorbent substrates such as smooth hard concrete etc.
Do not use in wetrooms.
| Volatile organic compound (VOC) | abt. 61 g/l |
|---|---|
| Theoretical spreading rate | 150 g/m²; 6.6 m²/kg |
| Density | abt. 1.02 g/ml |
| Drying time – dust free | 60 min |
| Drying time – touch dry | 1.5 h |
| Clean up | Wash the equipment immediately after use. Water, VERDÜNNER 1000-98. |
| Colours | Colourless. |
| Safety markings | See safety data sheet. |
| Approvals & certificates | EMICODE EC 1 |