TEKNOFLOOR AQUA RUBY 4500-40
Water-borne 1C floor sealing coating for interior use
- 1-component
- Water-borne
- Sealer
- 1-component
- Water-borne
- Sealer
TEKNOFLOOR AQUA RUBY 4500-40 is a water-borne, highly abrasion-resistant 1C floor sealing coating for low-emission, odourless treatment of practically all softwoods and hardwoods. TEKNOFLOOR AQUA RUBY 4500-40 is also suitable as a top sealing coating on TEKNOFLOOR AQUA MINOPRIMER 6700-00 for anhydrite floors. The product is resistant to light and yellowing.
Technical data sheet
Safety data sheet
Other product specific documents
Surface preparation
Every substrate must be well-cleaned, dry and free from grease and oil. Coating removal: Sand .
Sand the wooden floor thoroughly with a belt sander/sanding net and then remove dust. When renovating, wax and varnish residues from old treatments must be completely removed.
We recommend that the entire surface is levelled with wood dust binding agents. Especially if the room climate is dry or the parquet floor is glued to underfloor heating.
Application
Stir or shake the product well for several minutes before use, if necessary by machine.
Application conditions
Recommended temperature for surroundings and product: +15°C-25°C. Do not apply below +10°C. Ideal surface and object temperature for application: +18°C-22°C. Avoid application in direct sunlight. Underfloor heating systems must be adjusted well in advance.
Maintenance
Initial and maintenance care: After at least 3 weeks curing time with RENSA FLOOR POLISH 4580.
For more information on wood floor surface treatments and their use, visit www.parkett-verband.ch.
Storage
Storage temperature is +5°C - +30°C. Store in a tightly closed container.
When renovating or coating exotic wood species, we recommend using TEKNOFLOOR RENO PRIMER 3300-00.
Do not use on pear wood without a primer. Risk of film formation faults.
When using on dark woods please refer to the instructions in our VTM 5564 "White discolouration” in the areas around the joints of sealed dark wood floors.
| Volatile organic compound (VOC) | abt. 78 g/l |
|---|---|
| Theoretical spreading rate | 120 g/m²; 8.3 m²/kg |
| Density | abt. 1.03 g/ml |
| Drying time – dust free | 2 h |
| Drying time – through-dry | 7 d |
| Clean up | Wash the equipment immediately after use. VERDÜNNER 1000-98 |
| Colours | Colourless. |
| Safety markings | See safety data sheet. |
| Approvals & certificates | EMICODE EC 1 Plus,Swiss environmental label UE II, class C |
| Gloss value | 40 |