AQUAFILLER 1100-00
Water-borne acrylic primer
- Primer
- Primer
Use: Designed for wooden laths, doors, MDF, and fibre boards for indoor applications. Before using the product, the manufacturer should be contacted to check the suitability of the product for the object in question.
• Fast drying and easy to sand. • Provides a surface with excellent filling properties. • Can be top-coated with water-borne paints. AQUAFILLER 1100-00 gives a surface that has good filling properties and that can be top coated with water borne paints.
Surface preparation
The surface must be clean and dry.
The moisture content of the wood is to be below 20%.
Application
Stir thoroughly before use.
Application conditions
During the application and drying period the temperature of the ambient air, the surface and the product shall be above +15°C and the relative air humidity below 80%.
The best result is achieved when the temperature of the air is +23°C - +38°C, the relative humidity of the air 50 - 70% and the ventilation is good.
Storage
The storage stability is shown on the label. Store in a tightly closed container. The best storage temperature is +10°C - +25°C.
Must not freeze.
| Total mass of solids | abt. 720 g/l |
|---|---|
| Volatile organic compound (VOC) | abt. 33 g/l |
| Gloss | Matt |
| Tinting system | Teknocolor |
| Theoretical spreading rate | 8 m²/l (wet film 125 µm, dry film 48 µm) |
| Drying time – forced drying | +50°C / 50% RH: - dry to handle: 40 min after cooling - stackable / fit for sanding: 2 h |
| Thinner | Water. |
| Clean up | Water or TEKNOCLEAN 1949-00. |
| Colours | White. |
| Safety markings | See safety data sheet. |