AQUACOAT 2650-03
One-component topcoat
- Water-borne
- Topcoat
Water-borne enamel for surface treatment of wood, MDF, masonite, and chipboards for interior use.
Impact-resistant and tough surface. Good adhesion to primer and substrate. Good surface appearance. Fast drying. Good resistance to water, coffee, and alcohol.
Technical data sheet
Safety data sheet
- AQUACOAT 2650-03_RAL 9010_2022-11-08_EU_en
- AQUACOAT 2650-03_RAL 9010_2022-11-08_GB_en
- AQUACOAT 2650-03_RAL 9010_2022-11-08_IE_en
- AQUACOAT 2650-03_RAL 9010_2022-11-08_MT_en
- AQUACOAT 2650-03_RAL 9010_2022-11-08_NI_en
- AQUACOAT 2650-03_TS 0100 HVID_2022-11-08_EU_en
- AQUACOAT 2650-03_TS 0100 HVID_2022-11-08_GB_en
- AQUACOAT 2650-03_TS 0100 HVID_2022-11-08_IE_en
- AQUACOAT 2650-03_TS 0100 HVID_2022-11-08_MT_en
- AQUACOAT 2650-03_TS 0100 HVID_2022-11-08_NI_en
Surface preparation
The wood must be free from wood dust and contamination.
Application conditions
Certain timbers such as cedar, oak, mahogany, ash, etc. contain water-borne extractives, which can leach through the coating and stain opaque finishes. Please contact our technical department for further information.
Storage
The storage stability is shown on the label. Store in a tightly closed container. Must not freeze.
| Total mass of solids | abt. 600 g/l |
|---|---|
| Volatile organic compound (VOC) | abt. 3 g/l |
| Theoretical spreading rate | 8-10 m²/l |
| Thinner | Water. |
| Clean up | TEKNOCLEAN 1949-00 |
| Colours | White. |
| Safety markings | See safety data sheet. |