ANTISTAIN AQUA 2901-12
Primer for spray application
- Water-borne
- Primer
ANTISTAIN AQUA 2901-12, a water-borne industrial primer for new wood designated for exterior use such as windows and doors.
ANTISTAIN AQUA 2901-12 can be applied by Airmix or Airless spraying systems either by hand or in automated spraying facilities. ANTISTAIN AQUA 2901-12 will typically be applied on hardwood which for non-durable hardwood has been pretreated with a Wood Preservative. To obtain the correct film thickness to reduce surface discoloration caused by tannins in the hardwood, a pretreatment with one layer of ANTISTAIN AQUA 2901-63 is required.
ANTISTAIN AQUA 2901-12 reduces surface discoloration caused by tannins in hardwood.
Technical data sheet
Surface preparation
The wood must be free from wood dust and contamination. The moisture content of the wood should be approx. 13% and should not exceed 15%. Pretreatment is required for wood substrates not meeting Durability Class 3,
EN 350:2016. Teknos has a range of preservative products meeting the requirements of EN 599-1, please contact Teknos for further guidance.
The parts must always be pre-treated with 1 x ANTISTAIN AQUA 2901-63 before they are sprayed with ANTISTAIN AQUA 2901-12.
Application conditions
Stir thoroughly before use.
Optimum temperature for products and surroundings: +18°C - +22°C.
Optimum relative air humidity: Approx. 50%.
Wet film range 125-200 µm.
Storage
Storage temperature is +5°C - +30°C. Shelf life in unopened containers: See “Best before date” on the label. Keep containers tightly closed after use.
| Solids | abt. 30 % by volume |
|---|---|
| Volatile organic compound (VOC) | abt. 17 g/l |
| Theoretical spreading rate | 5-8 m²/l |
| Clean up | Water. |
| Colours | Colourless. |
| Packages | Available in a range of standard pack sizes. |
| Safety markings | See safety data sheet. |