Alkyd top coat or primer
- Corrosion protective
TEKNOCELL 1311 is a primer based on a combination of Nitrocellulose and alkyd resin. Contains corrosion protective pigments.
Can be used as a primer for steel for indoor and outdoor areas.
A fast drying primer
Remove from the surface any contaminants that might be detrimental to surface preparation and coating. Remove also water-soluble salts by using appropriate methods. The surface should be prepared as follows: STEEL SURFACES: Remove mill scale and rust by blast cleaning to preparation grade Sa 2½ (standard ISO 8501-1). Roughening the surface of thin-plate improves the adhesion of the paint to the substrate. OLD PAINTED SURFACES SUITABLE FOR OVERCOATING: Any impurities that might be detrimental to the application of paint (e.g. grease and salts) are to be removed. The surface must be dry and clean. Old, painted surfaces that have exceeded the maximum overcoating time are to be roughend as well. Damaged parts are prepared in accordance with the requirements of the substrate and the maintenance coating.
|Solids||abt. 26 % by volume|
|Volatile organic compound (VOC)||abt. 630 g/l|
|Drying time – dust free||after 20 min|
|Drying time – touch dry||after 60 min|
|Drying time – forced drying||60°C / 15min|
|Thinner||2129 TEKNOSOLV 6740|
|Clean up||2129 TEKNOSOLV 6740|