Brave Biora 20

Biora 20 is the ballsy one of the group, open to a bashing and can withstand a little more wear and tear than most. It has a slightly higher sheen level making it durable, the perfect choice for kitchens, bathrooms and cloakrooms.

Coverage: Practical spreading rates are as follows: Previously painted surface 10–12 m²/l New plaster or plaster board 4–7 m²/l

Drying:

Dust free after ½ hour

Overcoat after 2 hours

Pack sizes

0.9 Litre, 2.7 litre and 9 litre tins in all the wonderful Teknos Home colours

Preparation:

We recommend the use of Biora 3, to promote adhesion on all surfaces and to seal new plaster, before applying the Biora topcoats.

Stir thoroughly before use.

Apply a first coat by thinning with a 5 to 25% of clean tap water, depending upon the porosity of the substrate.

Finish by applying at least one undiluted coat, two on new plaster, or as required to achieve desired colour and finish.

For significant colour changes, undercoating with Biora 3 is highly recommended.

NB: This product is not recommended for painting over lime or other natural plasters. Do not paint in temperatures below 10°C or excessive heat above 30°C.