VELLAMO FILL 8700-00
Water-borne 1C filler for interior use
- 1-component
- Water-borne
- Filler
VELLAMO FILL 8700-00 is a water-borne, fast-drying, thixotropic filler with a high solids content, good isolating and excellent filling properties as well as very good sandability (even after three weeks). As it is particularly viscous, the product is especially suitable for applications on vertical surfaces.
Surface preparation
Every substrate must be well-cleaned, dry and free from grease and oil. Coating removal: Sand, strip
Application
Stir or shake the product well for several minutes before use, if necessary by machine.
Application conditions
During the application and drying period the temperature of the ambient air, the surface and the product shall be above +15°C and the relative air humidity below 70%.
Storage
Storage temperature is +5°C - +30°C. Store in a tightly closed container.
Application methods
Supplied viscosity: 30-35s DIN6
Caution Material is thixotropic!
Adhesion to MDF raw, spruce, beech, oak, Sipo - GT: 0
| Volatile organic compound (VOC) | abt. 50 g/l |
|---|---|
| Tinting system | Teknomix |
| Theoretical spreading rate | 200 g/m; 5 m/kg |
| Density | abt. 1.335 g/ml |
| Drying time – dust free | after 30 minutes |
| Drying time – touch dry | after 60 minutes |
| Drying time – through-dry | after 24 hours |
| Clean up | Wash the equipment immediately after use. Water, SPEZIALVERDÜNNER 1020-98. |
| Colours | White. |
| Safety markings | See safety data sheet. |