Water-borne acrylate dispersion primer for walls and ceilings indoors. Mildew-resistant. Finish: full-matt.
For priming unpainted concrete, plaster, filler, brick and building board surfaces. TIMANTTI 3 can be used as an adhesion primer for wall and ceiling surfaces previously painted with alkyd or dispersion paints. Also suitable for priming surfaces that are to be wallpapered or to which a stick-on wall covering (e.g. a non-woven wallpaper) is attached. TIMANTTI 3 can also be applied on galvanized sheet metal surfaces, such as air condition pipes.
Technical data sheet
Safety data sheet
Other product specific documents
|Solids||abt. 39 % by volume|
|Volatile organic compound (VOC)||EU VOC limit value (kat A/g): 30 g/l. The product's VOC: max. 30 g/l.|
|Density||abt. 1.6 g/ml|
|Drying time – dust free||after ½ hour|
|Clean up||Wash the equipment immediately after use with warm water and RENSA BRUSH brush cleaner.|
|Washability and wear resistance||Wet scrub resistance, class 2 according to EN 13300 (ISO 11998).|
|Packages||White: 0,9 L, 2,7 L, 9 L, 18 L. Off-white T1724 (T1327): 18 L|
|Safety markings||See Safety Data Sheet.|
|Approvals & certificates||M1 classification|