INFRALIT PE 8350-00
Polyester powder
- Powder coating
- Powder coating
INFRALIT PE 8350-00 is a TGIC-free powder coating based on solid polyester resin. At elevated temperature the powder will melt, cure and form the final paint film.
Suitable for objects which require a weather-resistant coating, especially for coating of aluminium objects. INFRALIT PE 8350-00 forms a mechanically and chemically resistant paint film which has good corrosion resistance and good colour stability and gloss retention also in outdoor conditions.
Technical data sheet
Safety data sheet
Other product specific documents
- Declaration of Conformity_Marine Equipment Directive 2014/90/EU_INFRALIT PE 8350.pdf
- EN 45545-2 Declaration of Conformity
- INFRALIT PE 8350 Qualicoat Class 1 approval_2026.pdf
- INFRALIT-PE-8350-GSB-material-licence-145 b-until-30-06-2027.pdf
- MED 2014-90-EU Module D_INFRALIT 8350_etc_EUFI29-25004092-MED_certificate.pdf
- MED 2014-90-EU-module B_INFRALIT PE 8350_etc_EUFI29-24004249-1-MED_certificate.pdf
- EN 13501-1_INFRALIT PE 8350_ ID 20341-3_report.pdf
- EN 13823_INFRALIT PE 8350_ ID 20341-1_report.pdf
- EN 45545-2 C24-0589B R7_INFRALIT 8XXX_etc_C24-0589B_report.pdf
- EN 45545-2 ISO 5858 R24-0589A_INFRALIT 8XXX_etc_R24-0589_report.pdf
- ISO 1716_INFRALIT PE 8350_ ID 20341-2_report.pdf
Surface preparation
STEEL SURFACES: Remove grease and dirt. After that blast-cleaning at least to preparation grade Sa 2½ (ISO 8501-1) and/or a suitable chemical pretreatment.
ALUMINIUM SURFACES: Remove grease and dirt. After that chromating or alternatively a suitable chemical pretreatment.
HOT-DIP-GALVANIZED AND ZINC-ELECTROPLATED SURFACES: Remove grease, dirt and white rust by e.g. alkali wash. Depending on exposure conditions, chromating or alternatively a suitable chemical pretreatment is also required.
Storage
The storage life is minimum 18 months in dry and cool conditions when the temperature during storage and transportation is max. +25°C.
Take special care during high temperature seasons. Avoid storing close to heat sources and heaters in trucks and storages. Don’t store in direct sunlight. The recommended expiry date of the powder coating that has been stored according to the instructions is shown on the package label.
| Practical spreading rate | 6 - 10 m²/kg depending on the film thickness. |
|---|---|
| Spraying | TRIBO/CORONA |
| Curing time | 10-25 min/180°C (metal temperature) |
| Colours | The colours that are available directly from stock are the standard and pearlescent shades according to RAL-CLASSIC Colour Card. Other shades by agreement. |
| Packages | 15 kg or 20 kg according to the density of the powder. |
| Safety markings | See safety data sheet. The powder itself is non-flammable, but with air it can form an explosive mixture that in presence of adequate ignition energy ignites. The lower explosion limit of typical powder coatings is between 20 g/m³ and 80 g/m³ (CEPE, Safe Powder Coating Guideline 8th Edition, 2020). Ventilation of the spray booth should be adjusted so that the concentration of powder in the air is less than 50% of the lower explosive limit value. On calculation of the powder concentration in the spray booth, the powder deposited on the workpiece is not taken into account. In order to avoid the discharge of powder from the booth into adjacent working spaces, the speed of air flow in the apertures of the booth must not fall below 0.5 m/s. Spray painters should wear dust masks and protective gloves. Any spatter of powder on the skin should be washed off with water and soap. |
| Approvals & certificates | ASTM E 662:2017,ASTM E 162:2016,EN 13501-1,EN 45545-2,GSB Florida 1 approval,Marine Equipment Approval (Module D),Marine Equipment Approval (Module B),Qualicoat approval, class 1 |
| Gloss value | 65-85 |