DRYWOOD OPTIFINISH TR GL
Intermediate and Topcoat for spray application
DRYWOOD OPTIFINISH TR GL is a water-borne gloss translucent industrial intermediate and topcoat for interior and exterior wooden joinery and other wood constructions. The product can also be used as a primer.
DRYWOOD OPTIFINISH TR GL is a quick drying product with good penetration into the wood and good wet adhesion, high transparency, and excellent colour and gloss retention. The product has high durability, low water-uptake, and excellent water resistance, long lasting elasticity, and high blocking resistance. The product has nice filling and leveling properties, is easy to sand, and has good overcoatability properties. Before use, the manufacturer or technical service department should be consulted to confirm the product’s suitability for the specific substrate, coating system, and exposure conditions.
Technical data sheet
Other product specific documents
Surface preparation
Application conditions
Storage
| Solids | abt. 33 % by volume |
|---|---|
| Volatile organic compound (VOC) | abt. 18 g/l |
| Gloss | Gloss |
| Tinting system | Teknocolor |
| Theoretical spreading rate | Approx. 6 m²/l at 60 µm dry film thickness. |
| Drying time – through-dry | See KOMO-certificate for drying conditions or min. 48 h at min. 15°C and max. 60% RH at 120 μm dry film thickness. |
| Clean up | Water. |
| Colours | Base T (translucent colours). |
| Packages | 10 l, 20 l. |
| Safety markings | See safety data sheet. |
| Approvals & certificates | EPD,KOMO Certificate BRL 0814 (32998) and BRL 0817 (33135) |