TEKNOPLAST PRIMER 7-01

Epoxy primer

  • Chemical resistant
  • Wear resistant
  • Intermediate
  • 2-component
  • Primer
  • Solvent-borne

TEKNOPLAST PRIMER 7-01 is a two-pack solvent-borne epoxy primer with low solvent content.

Used as a priming coat in abrasion and chemical resistant Epoxy Coating Systems. Can also be used for priming zinc, aluminium, thin-plate and acid-proof steel surfaces and as an intermediate coat over zinc epoxy and zinc silicate primers.

The paint is quickly overcoatable and is therefore suited to a fast painting tempo. It is also suitable for application by twin-feed spray. The paint film withstands heavy abrasion, oils, grease, solvents and chemical splashing. When painting at temperatures below +10°C either TEKNOPLAST PRIMER WINTER HARDENER 7399 (data sheet no. 1320) or TEKNOPLAST WINTER HARDENER 7212 (data sheet no. 1317) is to be used. The paint comes up to the specifications of Swedish Standard SSG 1021 paint type GA.

Solids abt. 66 % by volume
Total mass of solids abt. 1100 g/l
Volatile organic compound (VOC) abt. 320 g/l
Pot life 3 h (+23 °C)
Mixing ratio 4:1 by volume (comp. A : comp. B)
Hardener Comp. B: TEKNOPLAST HARDENER
Gloss Semi-matt
Drying time – dust free after 1 h
Drying time – touch dry after 4 h
Thinner TEKNOSOLV 9506
Clean up TEKNOSOLV 9506 or TEKNOSOLV 9530
Approvals & certificates SSG 1021-GA