INERTA 700

Polyurethane coating

INERTA 700 Polyurethane Coating is a two-pack solvent-free polyurethane coating.

Used for coating wagons that are used for transporting fertilizers, coal and ore. The product can be used also for coating concrete safety basins.

INERTA 700 endures impacts, hard abrasion, chemicals and constant submerging in water. It will also cure in -5°C temperature. The crack bridging ability of a 2 mm INERTA 700 layer on concrete is 1.9 mm (standard EN 1062-7, method A). The coating is applied to 500 - 2000 µm thickness. The product has CE approval for protection of concrete structures.

Technical data sheet

Safety data sheet

Other product specific documents

Solids abt. 100 % by volume
Total mass of solids abt. 1300 g/l
Volatile organic compound (VOC) abt. 0 g/l
Pot life 20 min. (+23 °C)
Mixing ratio 3:1 by volume (comp. A : comp. B)
Hardener Comp. B: INERTA 700 HARDENER
Gloss Gloss
Drying time – dust free after about 2 h
Drying time – touch dry after about 4 h
Drying time – fully cured after about 7 d
Thinner TEKNOSOLV 9521
Clean up TEKNOCLEAN 6496
Approvals & certificates CE marking